2-minute estimate

Get your free solar estimate.

Choose the route that matches your property to begin.

Fastest route · About 60 seconds

Choose your home size for an instant indicative proposal

No roof measurements or technical knowledge needed. Pick the closest home size and we will do the initial calculations for you.

Average home size Every preset is an early guide only and remains subject to survey, roof condition, electrical checks and final design.

The estimated costs reflect current average installation costs across the UK and are a realistic guide, but remain subject to a site survey for final design and quotation.

Option 2 · More accurate

Tailor the estimate to my home

Choose this route when you want the calculator to reflect the actual building, roof and energy information available.

Not sure about any question? Choose “Not sure”, or book a free consultation and we will do it with you.

Building and roof

The building stage suggests a mounting route; you can confirm another option or choose “not sure”. Listed and conservation status changes what permission is needed before anything can be fitted.

Building stage

Listed or conservation status Outbuildings within the grounds of a listed building normally count as listed too.

Provisional mounting preference

Roof covering

Main roof direction

Approximate roof pitch

Approximate daytime shading

Approx. clear roof width (metres, if known) Leave blank if unknown. The planning estimate applies provisional edge and fitting margins.

Approx. clear pitch or rafter length (metres, if known) Both clear dimensions are needed for a panel-count indication.

Energy use

Use annual kWh or an average monthly bill when known. If you do not have either, choose your home size and heating type for an indicative annual-use figure.

Indicative annual electricity use by home size and heating This guide now feeds the tailored calculation when you do not have bills or meter data. A known annual usage or monthly bill will take priority.

Annual electricity usage (kWh, if known)

Or average monthly electricity bill (£, if known)

Day unit rate (p/kWh) The savings model compares this rate with an assumed 8p/kWh off-peak rate over a six-hour charging window.

Postcode area

Electricity supply

Hybrid inverter

Battery storage

Number of battery modulesIgnored when “No battery” is selected.

Gateway / backup management

EV charger

Home energy managementAdvanced option integrates EV charging, heat pump, hot water and whole-house backup.

Building width for scaffolding (metres)Example: 10 m wide.

Building height for scaffolding (metres)Example: 5 m high.

Scaffold elevationsChoose two elevations when panels are planned on opposing east/west or south/north roof faces. Indicative rate: £25 per m².

Business energy profile

These inputs reveal whether the site deserves a commercial energy review. They do not create a technical design.

Type of site

Listed or conservation status Converted barns, farm buildings and high-street premises are frequently listed or protected.

Annual electricity usage (kWh)

Approx. total roof area (m², if known) Leave blank if unknown. The screening model provisionally treats 65% as usable.

When is most power used?

Electrical connection

Property position

Your role in the decision

Half-hourly usage data

Site postcode

Your early indication

A planning result

Indicative only

What the indicative package includes
Modern all-black 440 W solar panels, a compatible high-efficiency inverter, roof-specific mounting, system monitoring, standard installation, commissioning and handover. If selected, the battery illustration adds an approximately 8.3 kWh home battery with a 5 kW hybrid inverter for solar storage and off-peak tariff shifting. Exact manufacturers and warranties will be confirmed in the formal proposal.

Add more project details → Book a free consultation Speak to the team

What you will get

A transparent planning indication based on the details you enter.
A clear separation between home and commercial use cases.
The provisional on-roof or in-roof route for a home project.
The consent route when the building is listed or in a conservation area.
A sensible next step when important information is still missing.
A local Cotswold company with retained fitters, roofers and electricians—not unknown subcontractors.
Outstanding customer and technical support that national companies simply cannot offer.
Real testimonials from customers you can speak to. Don’t take our word for it.

What you will not get

A structural assessment, final layout, DNO approval or binding quote.
A binding quotation before product, roof and electrical checks.
A household battery assumption applied to an industrial site.
We don’t do cheap. We leave that to the “smash it in” teams. No—we deliver quality, support and integrity.

Paying for it

A minimum 25% deposit is required, with full payment due on practical completion of the installation. This excludes DNO final-approval certification lead times, which are outside our control.

RETURN ON INVESTMENT (ROI)

Using our entire installation portfolio to date, the average return on investment across our customer portfolio is just 7.4 years. The average annual saving on customers’ electricity bills is £1,474, representing an approximate annual saving of 67%.